Misumi Ceramics Circular Plates/with Holes

Описание

Part Number	Material	Finish Precision
PCEA	Alumina 96	Standard Grade
PCEAV	Alumina 96	Precision Grade (Upper-lower Surface Milling)
PCCES	Steatite	Standard Grade
PCCESV	Steatite	Precision Grade (Upper-lower Surface Milling)

Standard Type

Part Number	-	D	-	V	-	T
PCEA	-	35	-	25	-	2

Pre-drilled Type

Part Number	-	D	-	V	-	T	-	P.C.D	-	Screw Nominal Dia.
PCEA2H	-	50	-	10	-	5	-	35	-	N4

Accuracy Standards

Item	PCEA, PCCES	PCEAV, PCCESV
Thickness Parallelism (D=50)	0.1	0.05
Flatness (D=50)	T=1	0.1	0.05
T=2~5	0.1	0.05

• D Dimension Tolerance (Standard Grade, Precision Grade)• V Dimension Tolerance (Standard Grade, Precision Grade)±0.15

D20~80

±1%

Standard Type

Part Number	5mm IncrementD	1mm IncrementV	Selection T
Type	PCEAPCEAV	PCCESPCCESV
PCEA	20~80	0~70(V D-10)	125	35
PCEAV	20~50
PCCES	20~50*
PCCESV	20~50*

* Dimension D for PCCES and PCCESV is in 10mm increment.When D 55, T=1 and 2 are not selectable. (Only T=5 is selectable.) Pre-drilled Type

Part Number	5mm IncrementD	1mm IncrementV	Selection T	1mm Increment P.C.D	Screw Nominal Dia. Selection N (Through Hole)
Type	Number of Holes	PCEAPCEAV	PCCESPCCESV
PCEA	2H3H4H	20~80	0~70(V D-10)	125	35	10~403mm or more thickness is required between holes and between a hole and the perimeter.	3456810
PCEAV	20~50
PCCES	20~50*
PCCESV	20~50*

* Dimension D for PCCES and PCCESV is in 10mm increment.When D 55, T=1 and 2 are not selectable. (Only T=5 is selectable.)The product price is the price shown in the table by the material multiplier.

(Ex.)	Part Number	-	D	-	V	-	T		>>
	PCEAV	-	40	-	15	-	2

(Price in the Table)	x	(Material Multiplier)	=	Standard Type Unit Price

Material multiplier should be noted.Alterations
У данной серии продукции есть следующие артикулы:

• PCCES2H
• PCCES3H
• PCCES4H
• PCCES
• PCCESV2H
• PCCESV3H
• PCCESV4H
• PCCESV
• PCEA2H
• PCEA3H
• PCEA4H
• PCEA
• PCEAV2H
• PCEAV3H
• PCEAV4H
• PCEAV

''