Описание

Amplifier Unit, Expansion Unit, PNP
Model CZ-V22AP*1
Output PNP output
Main unit/Expansion unit Expansion unit
Response time 200 µs (HIGH SPEED) /1 ms (FINE) /4 ms (TURBO) /8 ms (SUPER)
Control output PNP open-collector x 4 channels, 30 VDC max., Up to 100 mA for one output, Up to 200 mA in total of 4 outputs, Residual voltage: 1.0 V max.*2
Protection circuit Reverse-polarity protection, overcurrent protection, surge absorber
External tuning input, external bank switch input (C/C + I-mode), external shift input (super I-mode) Input time: 20 ms min.
Timer function Timer OFF/OFF-delay/ON-delay/One-shot, Timer time: 1 to 1000 ms adjustable (for each bank respectively)
Unit expansion Up to 3 units (4 units total including the main unit)
Number of interference prevention units 0 for HIGH SPEED, 2 for FINE/TURBO/SUPER
Rating Power voltage 24 VDC, Ripple (P-P) 10 % or less
Power consumption Normal mode: 1.5 W (62.5 mA or less), Eco-mode: 1 W (42.0 mA or less)
Environmental resistance Ambient temperature -10 to +55 °C (No freezing)*3
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z axis
Material Housing, cover: Polycarbonate
Accessories End Unit ? 2
Weight Approx. 100 g
*1 The expansion unit of the FS-V20 Series cannot be connected to the main unit of the CZ-V20 Series. To connect the FS and CZ Series units, connect the expansion unit of the CZ-V20 Series to the main unit of the FS-V20 Series. To connect two or more expansion units, connect the CZ-V20 Series units on the right of the FS-V20 Series units. *2 20 mA max. when several units are connected. *3 When several units are connected, the acceptable ambient temperature varies depending on the conditions given below. To connect several units, be sure to mount them to a DIN rail and to limit the output current to a maximum of 20 mA. When 1 or 2 units are connected: -10 to +50 °C When 3 units are connected: -10 to +45 °C
''